Dr. Saldana: Publications and Patents

Publications

  • S. Basu, Z. Wang, C. Saldana, “Anomalous grain refinement in circular indentation of copper,” Acta Materialia, 2016, Vol. 105, pp. 25-34.
  • Q. Hatim, P. Witherell, S. Rachuri, C. Saldana, S. Kumara, “Requirement Analysis for a Material Information Model to Enable Sustainability Assessment,” International Journal of Advanced Manufacturing Technology, accepted, 2015.
  • R. Gandhi, D. Sebastian, S. Basu, J. B. Mann, P. Iglesias, C. Saldana, “Surfaces by vibration/modulation-assisted texturing for tribological applications,” International Journal of Advanced Manufacturing Technology, in press, 2015.
  • A. Sinlah, D. Handayani, R. M’Saoubi, K. Hayreynen, R. C. Voigt, C. Saldana, “Tooling performance in machining of Austempered Ductile Iron,” International Journal of Cast Metals Research, in press, 2015. 
  • S. Yadav, C. Saldana, T. G. Murthy, “Mechanics of indentation in porous brittle solids,” International Journal of Solids and Structures, 2015, Vol. 66, pp. 35-45.
  • J. Norman, C. Moreno, Z. Wang, J. B. Mann, C. Saldana, “Energy dissipation in modulation-assisted machining of aerospace alloys,” SAE International Journal of Materials and Manufacturing, 2015, Vol. 8, pp. 1-9.
  • D. Sagapuram, Z. Wang, C. Saldana, “Thermal stability of nano-twinned and nanocrystalline microstructures produced by cryogenic simple shear,” Philosophical Magazine, 2014, Vol. 94, pp. 3413-3430.
  • F. Du, S. Yadav, C. Moreno, T. G. Murthy, C. Saldana, “Incipient straining in severe plastic deformation methods,” Journal of Materials Research, 2014, Vol. 29, pp. 718-728.
  • T. G. Murthy, C. Saldana, M. Hudspeth, R. M’Saoubi, “Deformation heterogeneity in punch indentation,” Proceedings of the Royal Society of London, Series A: Mathematical, Physical and Engineering Sciences, 2014, Vol. 470, 20130807. Featured on cover of June 2014 issue of Royal Society A.
  • A. Mahato, Y. Guo, N. Sundaram, T. G. Murthy, C. Saldana, S. Chandrasekar, “Unconstrained plastic flow at surfaces in sliding and cutting,” International Journal of Precision Technology, 2013, Vol. 3, pp. 370-387.
  • C. Randall et.al, “Applications of a new hand-held reference point indentation instrument measuring bone material strength,” ASME Journal of Medical Devices, 2013, Vol. 4, 041005.
  • J. B. Mann, C. Saldana, Y. Guo, H. Yeung, S. Chandrasekar, “Effect of controlled modulation on surface textures in deep-hole drilling,” SAE International Journal of Materials and Manufacturing, 2013, Vol. 6, pp. 24-32.
  • C. Saldana, A. H. King, S. Chandrasekar, “Thermal stability of deformation microstructures in pure copper,” Acta Materialia, 2012, Vol. 60, pp. 4107-4116. 
  • R. M’Saoubi, T. Larsson, J. Outeiro, Y. Guo, S. Suslov, C. Saldana, S. Chandrasekar, “Surface integrity analysis of machined inconel 718 over multiple length scales,” CIRP Annals, 2012, Vol. 61, pp. 99-102.
  • N. Sundaram, Y. Guo, T. G. Murthy, C. Saldana, S. Chandrasekar, “Rotation field in wedge indentation of metals,” Journal of Materials Research, 2012, Vol. 27, pp. 284–293. 
  • C. Saldana, A. H. King, E. A. Stach, S. Chandrasekar, “Vacancies, twins and the thermal stability of ultrafine-grained copper,” Applied Physics Letters, 2011, Vol. 99, 231911. Selection to the Virtual Journal of Nanoscale Science & Technology, Vol. 25, 2012.
  • Y. Guo, C. Saldana, W. D. Compton, S. Chandrasekar, “Controlling deformation and microstruc ture on machined surfaces,” Acta Materialia, 2011, Vol. 59, pp. 4538– 4547.
  • J. B. Mann, Y. Guo, C. Saldana, W. D. Compton, S. Chandrasekar, “Enhancing material removal processes using modulation-assisted machining,” Tribology International, 2011, Vol. 44, pp. 1225–1235.
  • C. Saldana, S. Swaminathan, T. L. Brown, J. B. Mann, W. D. Compton, S. Chandrasekar, “Unusual applications of machining: controlled nanostructuring of materials and surfaces,” Journal of Manufacturing Science and Engineering, 2010, Vol. 132, 030908.
  • T. L. Brown, C. Saldana, T. G. Murthy, J. B. Mann, W. D. Compton, K. P. Trumble, A. H. King, S. Chandrasekar, “A study of the interactive effects of strain, strain rate and temperature in severe plastic deformation of copper,” Acta Materialia, 2009, Vol. 57, pp. 5491–5500.
  • J. B. Mann, C. Saldana, W. Moscoso, W. D. Compton, S. Chandrasekar, “Effects of controlled modulation on interface tribology and deformation in machining,” Tribology Letters, 2009, Vol. 35, pp. 221–227.
  • C. Saldana, T. G. Murthy, M. R. Shankar, E. A. Stach, S. Chandrasekar, "Stabilizing nanostructured materials by coherent nanotwins and their grain boundary triple junction drag," Applied Physics Letters, 2009, Vol. 94, 021910. Selection to the Virtual Journal of Nanoscale Science & Technology, Vol. 19, 2009. News article, “Stabilizing nanograins without additives,” A. Stevenson, ARS Technica, 01/23/09.
  • C. Saldana, P. Yang, J. B. Mann, W. Moscoso, D. D. Gill, S. Chandrasekar, K. P. Trumble, “Micro-scale components from high-strength nanostructured alloys,” Materials Science and Engineering: A, 2009, Vol. 503, pp. 172–175.
  • R. Calistes, S. Swaminathan, T. G. Murthy, C. Huang, C. Saldana, M. R. Shankar, S. Chandrasekar, "Controlling gradation of severe surface strains and nanostructuring by large strain machining," Scripta Materialia, 2009, Vol. 60, pp. 17–20.
  • P. Iglesias, W. Moscoso, J. B. Mann, C. Saldana, M. R. Shankar, S. Chandrasekar, W. D. Compton, K. Trumble, “Production analysis of new machining-based deformation processes for nanostructured materials,” International Journal of Material Forming, 2008, Vol. 1, pp. 459–462.
  • J. B. Mann, C. Saldana, S. Chandrasekar, W. D. Compton, K. P. Trumble. “Metal particulate production by modulation-assisted machining,” Scripta Materialia, 2007, Vol. 57, pp. 909–912.

Patents

  • J. B. Mann, C. Saldana, W. Moscoso, “Control systems and methods for machining operations,” US 8694133 B2 (grant), publication 8 April 2014.
Map of Georgia Tech

Georgia Institute of Technology
North Avenue, Atlanta, GA 30332
Phone: 404-894-2000