Dr. Liang: Publications and Patents

Publications

  • Su, J.-C., Young, K. A., Ma, K., Srivasta, S., Morehouse, J. B., and Liang, S. Y., “Modeling of Residual Stresses in Milling,” International Journal of Advanced Manufacturing Technology, Vol. 65, Issue 5, pp. 717-733, 2013.
  • Su, J.-C., Young, K. A., Ma, K., Srivatsa, S., Morehouse, J. B., and Liang, S. Y., “Predictive Modeling of Machining Residual Stresses Considering Tool Edge Effects,” Production Engineering Research and Development, : Vol. 7, Issue 4, pp. 391-400, 2013.
  • Venkatachalam, S., Li, X., Fergani, O., Yang, J. G., and Liang, S. Y., “Crystallographic Effects on Micro-scale Machining of Polycrystalline Brittle Materials,” ASME Trans. Journal of Micro and Nano-Manufacturing, Vol. 1, No. 4, pp. 041001-1~04100-9, 2013.
  • Hwang,J., Jeong,E.-H., Chung,E.-S., and Liang, S. Y., “Assessment of the Cutting Tooling Effect on Turning Chatter,” Proceedings ofInternational Conference on Mechatronics and Control Engineering(ICMCE), Dalian, China, 2013.
  • Ji, X., Zhang, X. P., Li, B. Z., and Liang,S. Y.,“Predictive Modeling of Cutting Force, Temperature, and Residual Stress in Minimum Quantity Lubrication,” Proceedings of 2nd International Conference on Machine Design and Manufacturing Engineering(ICMDME), Jeju Island, S. Korea, May 1~2, 2013.
  • Pucha, R., UtschigT., and Liang, S. Y., “Use of Process-oriented Approaches in Content-Intensive Courses: Some Insight in Teaching / Learning of Machine Design” Proceedings of 120th ASEE Annual Conference & Exposition, Atlanta, Paper ID # 6259,June 23-26, 2013.
  • Hwang,J., Jeong,E.-H., Chung,E.-S., and Liang, S. Y., “Assessment of the Cutting Tooling Effect on Turning Chatter,” Applied Mechanics and Materials, Vol. 433-435, pp. 2101-2106, 2013.
  • Ji, X., Zhang, X. P., and Liang,S. Y., “Effects of Cutting Fluid on Force, Temperature and Residual Stress,” Proceedings of International Forum on System and Mechatronics, Guilin, China, July 22~25, 2013.
  • Ji, X., Zhang, X. P., Li, B. Z., and Liang,S. Y., “Predictive Modeling of Minimum Quantity Lubrication: Cutting Force,Temperature and Residual Stress,” Applied Mechanics and Materials, Vol. 365-366, pp 1181-1184, 2013.
  • Li, B., Ni, J., Yang, J., and Liang, S. Y., “Study on High-speed Grinding Mechanisms for Quality and Process Efficiency,”International Journal of Advanced Manufacturing Technology, DOI 10.1007/s00170-013-5297-y, 2013.
  • Fergani, O., Mamedov, A., Lazoglu, I., Yang, J., and Liang, S. Y., “Prediction of Residual Stress Induced Distortions in Micro-milling of Al7050 Thin Plate”, Proceedings of International Conference on Management, Manufacturing and Materials Engineering(ICMMM), Xi’an, China, October 25-27, 2013.
  • Omar Fergani and Steven Y. Liang, “Materials–Affected Manufacturing", Manufacturing Letters, Vol. 1, 2–4, pp. 74–77, 2013.
  • Shih, A. H., and Liang, S. Y., “Magnetic Levitation and Rotation for Feasibility of Free-form Machining,” Proceedings of 2013 The 4th International Conference on Frontiers of Manufacturing and Design Science (ICFMD), Hong Kong, Dec11-13, 2013.
  • Shao, Y., Fergani, O., Venkatachalam, S., and Liang, S. Y., “Predictive Materials-Influenced Force Model in the Ductile-Regime Machining of Polycrystalline Brittle Materials,“ International Journal of Recent Advances in Mechanical Engineering(IJMECH), Vol. 2, No. 4, pp. 15-21, 2013.
  • Ji, X.; Li, B., Zhang, X., and Liang, S. Y. “The Effects of Minimum Quantity Lubrication (MQL) on Machining Force, Temperature, and Residual Stress”, International Journal of Precision Engineering and Manufacturing, Vol. 15, No. 11, pp. 2443-2451, 2014.
  • Ji,X., Zhang,X. P., and Liang, S. Y., “Predictive Modeling of Residual Stress in Minimum Quantity Lubrication Machining," International Journal of Advanced Manufacturing Technology, Vol. 70, No. 9-12, pp: 2159-2168, 2014.
  • Ji,X., Zhang,X., Li, B., and Liang, S. Y., “Modeling the Effects of Minimum Quantity Lubrication on Machining Force, Temperature, and Residual Stress,” Machining Science and Technology, Vol. 18, Issue 4, pp. 547-564, 2014.
  • Fergani, O., Tabei, A., Garmestani, H., and Liang, S. Y., “Prediction of Material Microstructural Texture Evolution in Machining via Viscoplastic Self-Consistent Modeling,” Journal of Manufacturing Processes, Vol. 16, pp. 543-550, 2014.
  • Tabei, A., Fergani, O., Garmestani, H., and Liang, S. Y.“Analysis of Micro-Texture and Grain Size Distributions in Machined Aluminum Alloy 7075,” Advanced Materials Research, Vol. 1052, pp. 489-494, 2014.
  • Ding, Z., Li, B., Zou, P., and Liang, S. Y., “Material Phase Transformation during Grinding,” Advanced Materials Research, Vol. 1052, pp. 503-508, 2014.
  • Fergani, O., Mkkadem, A., Lazoglu, I., Mansori, M., and Liang, S. Y., “Analytical Modelling of Residual Stress and the Induced Deflection of a Milled Thin Plate,” Journal of Advanced Manufacturing Technology, Issue 1-4, Vol. 75, pp. 455-463, 2014.
  • Rajora, M., Shih, A. H., Zou, P., Li, B. Z., and Liang, S. Y., “A Hybrid Neural Network for Prediction of Surface Roughness in Machining,”Applied Mechanics and Materials. Vols. 633-634, pp. 579-582, 2014.
  • Shih, A. H., and Liang, S. Y., “Magnetic Levitation and Rotation for Feasibility of Free-form Machining,” Applied Mechanics and Materials, Vols. 496-500, pp 1048-1051, 2014.
  • Liang, S. Y., Li, Y., Billington, S. A., Zhang, C., Shiroishi, J., Kurfess, T. R., and Danyluk, S., “Adaptive Prognostics for Rotary Machineries,” Proceedings of International Conference on Structural Integrity, Kalpakkam, India, pp. 847-853, February 4-7, 2014.
  • Fergani, O., Mamedov, A., Lazoglu, I., Yang, J., and Liang, S. Y., “Prediction of Residual Stress Induced Distortions in Micro-milling of Al7050 Thin Plate”, Applied Mechanics and Materials, Vol. 472, pp. 677-681, 2014.
  • Fergani, O., Shao Y., Lazoglu, I., and Liang, S. Y., “Temperature Effect on Grinding Residual Stress,” Procedia CIRP14, pp. 2–6, 2014.
  • Shao, Y. and Liang, S. Y., “Predictive Force Modeling in MQL (Minimum Quantity Lubrication) Grinding,” Proceedings of the ASME Manufacturing Science and Engineering Conference (MSEC), Detroit, June 9-13, 2014.
  • Fergani, O, Shao Y, and Liang, S Y, “Effect of Temperature on the Subsurface Microstructure and Mechanical Properties of AA 7075-T6 during Orthogonal Cutting,” Procedia CIRP13, pp. 181-185, 2014.
  • Ji, X., Shih, A. H., Rajora, M., Shao, Y., and Liang, S. Y. “A Hybrid Neural Network for Prediction of Surface Residual Stress in MQL Face Turning,” Applied Mechanics and Materials,Vols. 633-634, pp. 574-578, 2014.
  • Fergani, O., Tabei, A., Garmestani, H., and Liang, S. Y., “Prediction of Material Microstructural Texture Evolution in Machining via Viscoplastic Self-Consistent Modeling,” Proceedings of Transactions of SME, North American Manufacturing Research Institution (NAMRI/SME), Vol. 42, 2014.
  • Fergani, O., Shao, Y., Lazoglu, I., and Liang, S. Y., “Temperature Effects on Grinding Residual Stress,”, Procedia CIRP, Vol. 14, pp 2-6, 2014.
  • Wu, Z., Li, B., Yang, J., and Liang, S. Y., “Effect of Grinding Wheel on the Dynamic Performance of High-Speed Spindle Systemwith an Improved FE Model,” Journal of Vibroengineering, Vol. 16, Issue 4, p. 1698, 2014.

Patent

  • Method and Apparatus for Dielectric Sensing in a Thermoplastic Winding Process, U. S. Patent No. 5,495,177, with J. A. Urquhart-Foster, February 27, 1996
Map of Georgia Tech

Georgia Institute of Technology
North Avenue, Atlanta, GA 30332
Phone: 404-894-2000